TD In-line circulation pump
The TD series pumps are single stage in-line centrifugal pumps, equipped with standard motor and mechanical seal. Comparing with other pumps in similar structure, these pumps are less accessible to the impurity in the liquid
NPSH
To avoid the cavitations, and lessen the libration and noise, you are suggested to adopt NPSH, to make sure that the pumps are under optimal operation condition. The data in the sheet are relative pressure(Bar), which can be read on manometer at the inlet side of the pumps.
SJ Stainless steel multistage deep-well submersible pump
This series is applicable to circulation and pressurizing of the clean water and softened water;
This series is made from stainless steel 304 and has good corrosive resistance for conveying cold water containing small amount of oxides. It is also used for conveying slightly alkaline water and de-mineralized water. Pump made from stainless steel 316 and FPM is applicable to conveying highly corrosive liquid.
Working conditions
Solid grain-or-fiber-free dilute clean non-corrosive liquids;
Maximum liquid temperature: 35º C
Maximum working pressure: 30 bar
PH: 6.5~8.5
Maximum diving depth: <=50m
Audited Supplier 
){kind=link}
){kind=link}